rcwp www.vishay.com vishay dale revision: 04-apr-13 1 document number: 31011 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thick film chip resistors, industrial features ? same materials and construction as mil-prf-55342 chip resistors ? construction is sulfur impervious against a high sulfur environment (astm b 809-95 test method) ? termination: tin/lead wraparound termination over nickel barrier. also available with lead (pb)-free wraparound terminations ? capability to develop specific reliability programs designed to customer requirements ? size, value, packaging and materials can be customized for special customer requirements ? operating temperature rang e: - 55 c to + 150 c ? for zero ohm jumpers, see vishay dales rcwp jumper datasheet ( www.vishay.com/doc?31017 ) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. notes ? consult factory for extended resistance range. (1) power rating depends on the maxi mum temperature at the solder point, the component placement density and the substrate material . (2) continuous working voltage shall be or maximum working voltage, whichever is less. (3) mil case size 0705 and eia case size 0805 are dimensio nally the same. mechanical specifications resistive element ruthenium oxide encapsulation epoxy substrate 96 % alumina termination solder-coated nickel barrier solder finish pure tin or tin/le ad solder alloy available standard electrical specifications global ? model historical model case size power rating (1) p 70 c w maximum working voltage (2) v resistance range ? tolerance % temperature coefficient ppm/c rcwp0201 rcwp-0201 0201 0.05 30 10 to 46 5, 10 300 47 to 1m 1, 2, 5, 10 100, 200, 300 rcwp0502 rcwp-0502 0502 0.05 40 1 to 9.1 2, 5, 10 300 10 to 22m 1, 2, 5, 10 100, 200, 300 rcwp0302 rcwp-0302 0302 0.04 15 1 to 9.1 2, 5, 10 300 10 to 22m 1, 2, 5, 10 100, 200, 300 rcwp0402 rcwp-0402 0402 0.05 30 1 to 9.1 2, 5, 10 300 10 to 22m 1, 2, 5, 10 100, 200, 300 rcwp0603 rcwp-0603 0603 0.10 50 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp0540 rcwp-540 0504 0.08 40 1 to 9.1 2, 5, 10 300 10 to 22m 1, 2, 5, 10 100, 200, 300 rcwp0550 rcwp-550 0505 0.125 50 1 to 9.1 2, 5, 10 300 10 to 22m 1, 2, 5, 10 100, 200, 300 rcwp0575 rcwp-575 0705 (3) 0.15 70 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp5100 rcwp-5100 1005 0.20 100 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp1206 rcwp-1206 1206 0.25 100 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp5150 rcwp-5150 1505 0.35 125 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp1100 rcwp-1100 1010 0.50 100 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp7225 rcwp-7225 2208 0.60 200 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp2010 rcwp-2010 2010 0.80 200 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 rcwp2512 rcwp-2512 2512 1.0 200 1 to 5.6 2, 5, 10 300 5.62 to 22m 1, 2, 5, 10 100, 200, 300 p x r
rcwp www.vishay.com vishay dale revision: 04-apr-13 2 document number: 31011 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? for additional information on packaging, refer to the surface mount resistor packaging document ( www.vishay.com/doc?31543 ). (1) tape and reel packaging with pl astic tape standard for all case sizes except 0201. for the 0201 case size, the product is only offered in tape and reel packaging with paper tape. global part number information new global part numbering: rcwp510010k0gm wb (preferred part numbering format) global model resistance value tolerance code temperature coefficient packaging code (1) special (see standard electrical specifications table) r = ? k = k ? m = m ? 10r0 = 10 ? 1k30 = 1.3 k ? 1m00 = 1.0 m ? 0000 = 0 ? jumper f = 1 % g = 2 % j = 5 % k = 10 % z = 0 ? jumper k = 100 ppm n = 200 ppm m = 300 ppm s = special, 0 ? jumper tp = tin/lead, t/r, plastic tape (full reel; all sizes except 0201) s3 = tin/lead, t/r, plastic tape (1000 pieces; all sizes except 0201) wb = tin/lead, waffle tray s2 = tin/lead, t/r, plastic tape (500 pieces; all sizes except 0201) s6 = tin/lead, t/r, plastic tape (300 pieces; all sizes except 0201) ua = tin/lead, t/r, paper tape (full reel; 0201 only) ud = tin/lead, t/r, paper tape (1000 pieces; 0201 only) uc = tin/lead, t/r, paper tape (500 pieces; 0201 only) ub = tin/lead, t/r, paper tape (300 pieces; 0201 only) blank = standard (dash number) (up to 2 digits) from 1 to 99 as applicable 99 = 0 ? jumper ea = lead (pb)-free, t/r (full) eb = lead (pb)-free, t/r (1000 pieces) et = lead (pb)-free, waffle tray ec = lead (pb)-free, t/r (500 pieces) ed = lead (pb)-free, t/r (300 pieces) historical part number: rcwp-5100103g (will continue to be accepted) rcwp-5100 103 g t03 historical model resistance value tolerance code packaging code derating curve - 55 - 25 0 2 55 0 75 100 125 150 175 120 100 80 60 40 20 0 ambient temperature in c 70 rated power in % cwp510010 r k0gmwb
rcwp www.vishay.com vishay dale revision: 04-apr-13 3 document number: 31011 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches (millimeters) global ? model a (length) b (width) c (height) d (top term) e (bottom term) rcwp0201 0.024 0.002 (0.61 0.05) 0.012 0.002 (0.30 0.05) 0.009 0.002 (0.23 0.05) 0.006 0.003 (0.15 0.08) 0.006 + 0.002 - 0.004 (0.15 + 0.05 - 0.10) rcwp0302 0.034 0.004 (0.86 0.10) 0.021 0.003 (0.53 0.08) 0.013 0.003 (0.33 0.08) 0.007 0.005 (0.18 0.13) 0.008 0.005 (0.20 0.13) rcwp0402 0.039 0.003 (0.99 0.08) 0.020 0.003 (0.51 0.08) 0.013 0.003 (0.33 0.08) 0.010 0.005 (0.25 0.13) 0.010 0.005 (0.25 0.13) rcwp0502 0.055 0.005 (1.40 0.13) 0.023 0.003 (0.58 0.08) 0.015 0.003 (0.38 0.08) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) rcwp0540 0.055 0.005 (1.40 0.13) 0.040 0.005 (1.02 0.13) 0.020 0.005 (0.51 0.13) 0.010 0.005 (0.25 0.13) 0.010 0.005 (0.25 0.13) rcwp0550 0.055 0.005 (1.40 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) rcwp0575 0.080 0.005 (2.03 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.016 0.008 (0.41 0.20) 0.015 0.005 (0.38 0.13) rcwp0603 0.063 0.005 (1.60 0.13) 0.032 0.005 (0.81 0.13) 0.018 0.005 (0.46 0.13) 0.012 0.005 (0.30 0.13) 0.015 0.005 (0.38 0.13) rcwp1100 0.105 0.005 (2.67 0.13) 0.100 0.005 (2.54 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwp1206 0.125 0.005 (3.18 0.13) 0.063 0.005 (1.60 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwp2010 0.197 0.006 (5.00 0.15) 0.098 0.005 (2.49 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwp2512 0.250 0.006 (6.35 0.15) 0.124 0.005 (3.15 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwp5100 0.105 0.005 (2.67 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwp5150 0.155 0.005 (3.94 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwp7225 0.230 0.005 (5.84 0.13) 0.075 0.005 (1.91 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) b a d c e
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
